Honda Fit/Jazz - A/T Park Pin Switch Test/Replacement (L15A CVT)
A/T Park Pin Switch Test/Replacement
Remove the center console.
2. | Disconnect the park pin switch connector (2P).
|
3. | Shift the shift lever into the P position, then check for continuity between the No. 1 and No. 2 terminals. There should be continuity.
|
4. | Shift the shift lever out of the P position, and check for continuity between the terminals in step 3. There should be no continuity.
|
5. | If the park pin switch is faulty, remove the shift lever assembly, and replace the detent bracket. (The park pin switch is not available separately.)
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals