Honda Fit/Jazz - Audio Unit Removal/Installation
Audio Unit Removal/Installation
2. | Disconnect the 20P connector and antenna lead from the audio unit.
|
3. | Disconnect the connectors from the heater control panel.
|
4. | Disconnect the connector from the rear window defogger switch.
|
5. | Remove the seven mounting screws, then remove the audio unit (A).
|
6. | Remove the four mounting screws from the LCD unit (A), then remove the cover (B).
|
7. | Remove the two knobs (A).
|
8. | Remove the sixteen mounting screw from the printed circuit board (B), then remove the printed circuit board and LCD unit.
|
9. | Install the reverse order of removal.
NOTE: Do not remove the connection of the printed circuit board and the LCD unit.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals