Honda Fit/Jazz - Breather Line and Suction Line Inspection (Without ETCS)
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included
Breather Line and Suction Line Inspection
2. | Disconnect the suction hose (A) form the fuel pump, and connect a vacuum pump (B). |
3. | Start the engine, and check the vacuum. Is there Vacuum? YES - Go to 4. NO - Replace the fuel filter.n |
4. | Turn the ignition switch OFF. |
5. | Connect a vacuum pump (A) to the suction hose, and apply vacuum to the hose (B). Does the hold vacuum? YES -
NO - Go to 6. |
6. | Disconnect the breather hose (A) of the filler side from the 3-way joint (B), and set the rubber cap (C) to the 3-way joint. |
7. | Connect a vacuum pump (A) to the suction hose, and apply vacuum to the hose (B). Does the hold vacuum? YES - Check the blockage between the 3-way joint and the fuel tank vapor liquid separation Valve on the breather line. If line is OK, replace the fuel tank.n NO - Go to 8. |
8. | Connect a vacuum pump (A) to the breather hose (B) of the filler side, and apply vacuum. Does the hold vacuum? YES - Check the blockage between the 3-way joint and the filler neck on the breather line.n NO - Go to 9. |
9. | Remove the rubber cap from the 3-way joint, and reconnect the breather hose to the 3-way joint. |
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included