Honda Fit/Jazz - CVT Control Shaft Removal/Inspection (CVT)
CVT Control Shaft Removal/Inspection
1. | Remove the bolt (A) and lock washer (B), then remove the control lever (C) from the control shaft (D).
|
2. | Remove the control shaft from the transmission housing.
|
3. | Check for fluid leaks between the housing and oil seal (E). If there is a fluid leak, replace the oil seal with a new one.
|
4. | Install the control shaft in the transmission housing, and install the control lever on the control shaft.
|
5. | Install the lock bolt with the new lock washer.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals