Honda Fit/Jazz - CVT Input Shaft Planetary Carrier Clearance Inspection (CVT)
CVT Input Shaft Planetary Carrier Clearance Inspection
| 1. | Measure the clearance between the 25 x 31 mm thrust shim (A) and the snap ring (B) with a feeler gauge (C), in at least three places. Use the average as the actual clearance.
| STANDARD: | 0.05-0.115 mm (0.018-0.030 in.) |
 |
| 2. | If the clearance is out of standard, remove the 25 x 31 mm thrust shim (A) and measure its thickness.
 |
| 3. | Select and install the new thrust shim, and secure them with the snap ring, then recheck.
THRUST SHIM, 25 x 31 mm
| No. | Part Number | Thickness |
|---|
| A | 90451-P4V-000 | 1.05 mm (0.041 in.) | | B | 90452-P4V-000 | 1.12 mm (0.044 in.) | | C | 90453-P4V-000 | 1.19 mm (0.047 in.) | | D | 90454-P4V-000 | 1.26 mm (0.050 in.) | | E | 90455-P4V-000 | 1.33 mm (0.052 in.) | | F | 90456-P4V-000 | 1.40 mm (0.055 in.) | | G | 90457-P4V-000 | 1.47 mm (0.058 in.) | | H | 90458-P4V-000 | 1.54 mm (0.061 in.) | | I | 90459-P4V-000 | 1.61 mm (0.063 in.) | | J | 90460-P4V-000 | 1.68 mm (0.066 in.) | | K | 90461-P4V-000 | 1.75 mm (0.069 in.) | | L | 90462-P4V-000 | 1.82 mm (0.072 in.) | | M | 90480-P4V-000 | 1.085 mm (0.0427 in.) | | N | 90481-P4V-000 | 1.155 mm (0.0454 in.) | | O | 90482-P4V-000 | 1.225 mm (0.0482 in.) | | P | 90483-P4V-000 | 1.295 mm (0.0510 in.) | | Q | 90484-P4V-000 | 1.365 mm (0.0537 in.) | | R | 90485-P4V-000 | 1.435 mm (0.0565 in.) | | S | 90486-P4V-000 | 1.505 mm (0.0593 in.) | | T | 90487-P4V-000 | 1.575 mm (0.0620 in.) | | U | 90488-P4V-000 | 1.645 mm (0.0648 in.) | | V | 90489-P4V-000 | 1.715 mm (0.0675 in.) | | W | 90490-P4V-000 | 1.785 mm (0.0703 in.) |
|
| 4. | After replacing the 25 x 31 mm thrust shim, make sure that the clearance is within the standard.
|
| 5. | Verify that the snap ring outside diameter is 30.7 mm (1.21 in.) or less.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
