Honda Fit/Jazz - Cable Reel Subharness Replacement - With 7-speed Mode (CVT)
Cable Reel Subharness Replacement - With 7-speed Mode
Precautions and Procedures.Remove the steering wheel.
2. | Remove the screws (A) (4) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.
|
3. | Remove steering shift + (plus) switch connector from its clamp, and disconnect the connector.
|
4. | Remove the screw (C) securing the steering shift + (plus) switch (D), then remove the steering shift + (plus) switch and 7SPEED MODE main switch (E).
|
5. | Disconnect 7SPEED MODE main switch connector.
|
6. | Remove the steering shift - (minus) switch connector (A) from its clamp, and disconnect the connector. Disconnect audio remote control switch connector if equipped.
|
7. | Remove the harness guide (B) and cable reel subharness (C), and remove the cable reel subharness from the harness guide.
|
8. | Replace the cable reel subharness, and install the new subharness on the harness guide.
|
9. | Install the harness guide on the steering wheel.
|
10. | Install the 7SPEED MODE main switch and steering shift + (plus) switch with the screw, and install the steering wheel rear cover with the screws (4).
|
11. | Connect disconnected connectors.
|
Install the steering wheel.
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals