Honda Fit/Jazz - Camshaft Sprocket Removal (L15A)
Camshaft Sprocket Removal
NOTE: Keep the cam chain away from magnetic fields.
Remove the cylinder head cover.
2. | Make a reference mark (A) across the camshaft sprocket and cam chain.
|
3. | Apply engine oil to the slider surface of the cam chain tensioner slider through the oil return hole in the cylinder head.
|
4. | Remove the cylinder head plug.
|
5. | Hold the crankshaft pulley and set the socket wrench (A) on the camshaft sprocket bolt.
|
6. | Remove the maintenance bolt (B), and turn the camshaft clockwise to compress the cam chain tensioner, then install the 6 x 1.0 mm bolt (C) in the bolt hole (D) on the cylinder block through the maintenance hole and cam chain tensioner (E).
NOTE:
- Turning torque should not exceed 56 N·m (5.7 kgf·m, 41 lbf·ft), when turning the camshaft.
- Do not turn the camshaft counterclockwise.
|
7. | Hold the camshaft with an open-end wrench, then remove the camshaft sprocket.
NOTE: Hang the cam chain with a wire.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals