Honda Fit/Jazz - DTC Troubleshooting: 23-3
Honda Automotive Service ManualsHigh Quality Online manuals, fast download
DTC Troubleshooting: 23-3
| DTC 23-3: | Short to Another Wire or Decreased Resistance in Left Side Seat Belt Outer Lap Tensioner |
Special Tools Required
SRS inflator simulator( 07SAZ-TB4011A)
Erase the DTC memory.
| 2. | Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off. Does the SRS indicator stay on? YES - Go to Go to Troubleshooting Intermittent Failures.n |
| 3. | Turn the ignition switch OFF. Disconnect the battery negative cable, and wait for 3 minutes. |
| 4. | Disconnect the TBL1o connector from the TBL1i connector (A). Disconnect the both seat belt tensioner 4P connectors from the floor wire harness 4P connectors. |
| 11. | Disconnect the TBR1o connector (A) from the TBR1i connector (B).  |
| 12. | Disconnect the U2o connector (A) from the SRS unit.  |
| 13. | Disconnect the SRS inflator simulator (special tool) from the SRS simulator lead E. |
| 14. | Check resistance between the terminals of the SRS simulator lead E. There should be an open circuit, or at least 1 MW.  Is the resistance as specified? YES - Faulty SRS unit; replace the SRS unit.n NO - Short in the floor wire harness; replace the floor wire harness.n |
Honda Automotive Service ManualsHigh Quality Online manuals, fast download
