Honda Fit/Jazz - DTC Troubleshooting: P0108 (3-2) (5MT)
DTC Troubleshooting: P0108 (3-2)
DTC P0108 (3-2): | MAP Sensor Circuit High Voltage |
1. | Start the engine. Hold the engine at 3,000 rpm (min-1) with no load (in Park or neutral) until the radiator fan comes on, then let it idle. |
2. | Check the MAP with the scan tool. Is about 101 kPa (760 mmHg, 30 in.Hg) or higher, or about 2.9 V or higher indicated? YES - Go to Substitute a known-good ECM/PCM and recheck. If the symptom/indication goes away, replace the original ECM/PCM.n NO - Repair open in the wire between the ECM/PCM (A19) and the MAP sensor.n |