Honda Fit/Jazz - DTC Troubleshooting: P0118 (6) (With ETCS)
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included
DTC Troubleshooting: P0118 (6)
DTC P0118: | ECT Sensor Circuit High Voltage |
1. | Turn the ignition switch ON (II). |
2. | Check the ECT SENSOR in the DATA LIST with the HDS. Is about -40°C (-40°F) or less, or 4.87 V or higher indicated? YES - Go to Connect the ECM test harness and the test pin box between the ECM and connector. |
14. | Measure voltage between test pin box terminal No. 81 and body ground. Is there about 5 V? YES - Repair open in the wire between the ECM connector No. 3 terminal No. 52 (test pin box terminal No. 81) and the ECT sensor, then go to Do the ETCS learn procedure. |
21. | Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS. Are any Temporary DTCs or DTCs indicated? YES - If DTC P0118 is indicated, check for poor connections or loose terminals at the ECT sensor and the ECM, then go to Substitute a known-good ECM. |
23. | Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS. Are any Temporary DTCs or DTCs indicated? YES - If DTC P0118 is indicated, check for poor connections or loose terminals at the ECT sensor and the ECM, then go to Replace the original ECM.n |
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included