Honda Fit/Jazz - DTC Troubleshooting: P2138 (37) (With ETCS)
Place your banner in PDF ManualTry if FREE Today!
DTC Troubleshooting: P2138 (37)
DTC P2138: | APP sensor A/B Incorrect Voltage Correlation |
1. | Turn the ignition switch ON (II). |
2. | Do the DTC CLEAR in the CLEAR MENU with the HDS. |
3. | Open the throttle to full position several times. |
4. | Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS. Is DTC P2138 indicated? YES - Go to Connect the ECM test harness and the test pin box to the wire harness only, not to the ECM. |
8. | Check for continuity between test pin box terminals No. 63 and No. 79. Is there continuity? YES - Go to Do the ETCS learn procedure. |
16. | Open the throttle to full position several times. |
17. | Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS. Are any Temporary DTCs or DTCs indicated? YES - If DTC P2138 indicated, check for poor connections or loose terminals at the APP sensor and the ECM, then go to Substitute a known-good ECM. |
19. | Open the throttle to full position several times. |
20. | Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS. Are any Temporary DTCs or DTCs indicated? YES - If DTC P2138 indicated, check for poor connections or loose terminals at the APP sensor and the ECM, then go to Replace the original ECM. |
Place your banner in PDF ManualTry if FREE Today!