DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Honda Fit/Jazz - Engine Installation (With ETCS)

Engine Installation

1.Position the engine under the vehicle. Attach the chain hoist to the engine, then lift the engine into position in the vehicle.



Reinstall the mounting bolts/support nuts in the sequence given. Failure to follow this sequence may cause excessive noise and vibration, and reduce bushing life.


2.Install the front subframe (A), then secure the under covers with the clips (B).
Install the steering gearbox on the front subframe.

13.Install a new set ring on the end of each driveshaft, then install the driveshafts. Make sure each ring ‘‘clicks'' into place in the differential and intermediate shaft.

Connect the suspension lower arm ball joints.

Connect the stabilizer links.

16.Install the three way catalytic converter (TWC) (A); use new gaskets (B) and new self locking nuts (C).
Perform the ETCS learn procedure.

Inspect the idle speed.

Inspect the ignition timing.

Check the wheel alignment.

Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals