Honda Fit/Jazz - High/Low Beam Switching Solenoid Replacement
High/Low Beam Switching Solenoid Replacement
Remove the HID bulb from the headlight.
| 3. | Disconnect the 2P connector (A) from the high/low beam switching solenoid (B).
 |
| 4. | Turn the headlight adjuster (C) about eight turns counterclockwise.
|
| 5. | Place a clean shop towel or paper (D) under the high/low beam switching solenoid.
|
| 6. | Remove the two screws from the high/low beam switching solenoid (A).
 |
| 7. | Disconnect the 1P terminal (B) and remove the high/low beam switching solenoid.
NOTE: Do not touch the hood and the moving part. It is necessary to clean if touch the parts.
|
| 8. | Install the switching solenoid in the reverse order of removal.
|
| 9. | After replacement, check the hood operation and adjust the headlight.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
