Honda Fit/Jazz - Master Cylinder Disassembly
Master Cylinder Disassembly
1. | Remove the circlip (A) while pushing in the secondary piston (B).
|
2. | Remove the reservoir (A).
|
3. | Remove the stop pin (B) while pushing in the secondary piston (C).
|
4. | Remove the secondary piston (A) and primary piston (B).
|
5. | Remove the reservoir seal (A) from the reservoir cap (B).
|
6. | Remove the strainer(C) and grommets (D) from the reservoir (E).
NOTE: When reservoir and master cylinder body are separated, replace the grommets with new ones.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals