Honda Fit/Jazz - Rear Door Channel Tapes Replacement

Rear Door Channel Tapes Replacement

NOTE:

Keep dust away from the working area.
When working at lower temperatures, heat the door channel and door channel tape with a hair dryer.
Door channel: about 15°C (59°F).
Door channel tape: about 30°C (86°F).
When heating the door channel tape, heat it evenly and gradually to prevent deformation.
When pressing the door channel tape, slowly press it from the corner to prevent air bubbles and wrinkles.
If there are air bubbles (A) in the door channel tape (B), prick them with a pin (C), then release the air with your finger or a plastic squeegee.
If the air bubble is more than 10 mm (0.4 in.) in diameter, peel up the door channel tape, then reapply it.

Check for water leaks.

Attachment Point (Reference):

linked with us:
Links to Resources