Honda Fit/Jazz - Rear Hub Bearing Unit Replacement - Rear Disc Brake
Rear Hub Bearing Unit Replacement - Rear Disc Brake
Exploded View-Disc Brake
Hub Replacement-Disc Brake
Raise the rear of the vehicle, and support it with safety stands in the proper locations.
| 2. | Remove the wheel nuts and rear wheel.
 |
| 3. | Remove the brake caliper bracket mounting bolts (A), and remove the caliper assembly (B) from the spindle. To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose with force.
 |
| 4. | Remove the hub cap (A).
 |
| 5. | Raise the stake (B), and remove the spindle nut (C).
|
| 6. | Remove the 6 mm brake disc retaining screws (A).
 |
| 7. | Screw two 8 x 1.25 mm bolts (B) into the disc to push it away from the hub. Turn each bolt two turns at a time to prevent cocking the disc excessively.
|
| 8. | Remove the brake disc (C).
|
| 9. | Remove the hub bearing unit (A).
 |
Check the wheel alignment, and adjust it if necessary.
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
