Honda Fit/Jazz - Rear Window Defogger Function Test
Rear Window Defogger Function Test
NOTE:- Be careful not to scratch or damage the defogger wires with the tester probe.
- Before testing, check the No. 9 (20A) fuse in the under-dash fuse/relay box.
1. | Check for voltage between the positive terminal (A) and body ground with the ignition switch and defogger switch ON. There should be battery voltage.
|
2. | Check for continuity between the negative terminal (B) and body ground. If there is no continuity, check for:
|
3. | Touch the voltmeter positive probe to the halfway point of each defogger wire, and the negative probe to the negative terminal. There should be about 6 V with the ignition switch and the defogger switch ON.
|