Honda Fit/Jazz - Recirculation Control Motor Replacement
Recirculation Control Motor Replacement
NOTE: LHD type is shown, RHD type is symmetrical.
1. | Turn the ignition switch OFF.
|
Remove the inner glove box.
3. | Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor from the blower unit.
|
4. | Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals