DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Honda Fit/Jazz - Rocker Arm Assembly Installation (L15A)

Rocker Arm Assembly Installation

1.Install the rocker arm assembly (A) with dowel pin (B).

NOTE: When reassembling the rocker arms, Install the rocker arm from cam chain side on the rocker shaft.

2.Tighten each bolts two turns at a time in sequence below.

Specified torque:
29 N·m (3.0 kgf·m, 22 lbf·ft)
Apply engine oil to the bolt threads and flange

3.Remove the rubber bands (A) from the intake rocker arms.

Adjust the valve clearance.

Install the cylinder head cover.

Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals