Honda Fit/Jazz - SRS Cable Reel Replacement
SRS Cable Reel Replacement
Removal
1. | Make sure the front wheels are aligned straight ahead.
|
2. | Disconnect the battery negative cable, and wait at least 3 minutes.
|
3. | Remove the driver's airbag.
|
4. | Remove the steering wheel bolt (A). Remove the steering wheel with a steering wheel puller. Do not tap on the steering wheel or steering column shaft when removing the steering wheel.
|
6. | Remove the column cover screws (A), then remove the column covers (B, C). Install the driver's airbag.
|
9. | Reconnect the battery negative cable.
|
10. | After installing the cable reel, confirm proper system operation:
- Turn the ignition switch ON (II); the SRS indicator light should come on for about 6 seconds and then go off.
- After the SRS indicator has turned off, turn the steering wheel fully left and right to confirm the SRS indicator does not come on.
- Make sure the horn button works.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals