DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Honda Fit/Jazz - SRS Unit Replacement

SRS Unit Replacement

Removal


1.Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.

2.Disconnect the driver's and front passenger's airbag connectors.

3.Disconnect the side airbag connectors.

4.Disconnect both seat belt tensioner connectors.

Remove the center console.

6.Pull down the carpet, then disconnect the connectors and remove the two Torx bolts (A), then pull out the SRS unit (B) from the right side.
Reconnect the driver's and front passenger's airbag connectors.

4.Reconnect the side airbag connectors.

5.Reconnect both seat belt tensioner connectors.

6.Reconnect the battery negative cable.

7.Initialize the OPDS unit.

8.After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.

Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals