DIY     OBD-II Codes     Fix your Car     Repair Manuals     -Forum-

Honda Fit/Jazz - Standards and Service Limits - 12

Steering
ItemMeasurementQualificationStandard or NewService Limit
Steering wheelRotational play measured at outside edge with engine running0-10 mm (0-0.39 in.)
Starting load measured at outside edge with engine running29 N (3.0 kgf, 6.6 lbf)
GearboxAngle of rack guide screw loosened from locked position12° Max.



Suspension
ItemMeasurementQualificationStandard or NewService Limit
Wheel alignmentCamberFront0°00¢±1°
Rear-1°00¢±1¢
CasterFront2°10¢±1°
Total ToeFront0±3 mm (0±0.12 in.)
RearIN 2±2 mm (2± 0.08 in.)
Front wheel turning angle equipped with 175/65 R14 82T tyresInside wheel41°00¢
Outside wheel36°(Reference)
Front wheel turning angle equipped with 185/55 R15 82V tyresInside wheel38°00¢±2°
Outside wheel34°(Reference)
WheelSteel wheel runoutAxial0-1.0 mm (0-0.04 in.)2.0 mm (0.08 in.)
Radial0-1.0 mm (0-0.04 in.)1.5 mm (0.06 in.)
Aluminum wheel runoutAxial0-0.7 mm (0-0.03 in.)2.0 mm (0.08 in.)
Radial0-0.7 mm (0-0.03 in.)1.5 mm (0.06 in.)
Wheel bearingEnd playFront0-0.05 mm (0-0.002 in.)
Rear0-0.05 mm (0-0.002 in.)

Brakes
ItemMeasurementQualificationStandard or NewService Limit
Parking brake leverDistance travelled when lever pulled with 196 N (20 kgf, 44 lbf) of force7-10 clicks
Brake pedalPedal height (Carpet removed)M/T141 mm (5 9/16 in.)
CVT145 mm (5 11/16 in.)
Free play1-5 mm (0.04-0.2 in.)
Master cylinderPiston-to-pushrod clearance0-0.4 mm (0-0.02 in.)
Front brakes
(disc brake)
Disc thickness21.0 mm (0.83 in.)19.0 mm (0.75 in.)
Disc runout———0.10 mm (0.004 in.)
Disc parallelism———0.015 mm
(0.0006 in.)
Pad thickness9.0 mm (0.35 in.)1.6 mm (0.06 in.)
Rear brake sBrake drum I.D.180 mm (7.09 in.)181 mm (7.13 in.)
Brake shoe lining thickness4.3 mm (0.17 in.)1.0 mm (0.039 in.)
Brake boosterMaster cylinder fluid pressure at 0 kPa (0 mmHg, 0 in. Hg) of vacuum with pressing brake pedalPressed with 98 N (10 kgf, 22 lbf)0 kPa (0 kgf/cm2, 0 psi)
Pressed with 290 N (30 kgf, 66 lbf)1,600 kPa (16 kgf/cm2, 230 psi)
Master cylinder fluid pressure at 66.7 kPa (500 mmHg, 19.7 in. Hg) of vacuum with pressing brake pedalPressed with 98 N (10 kgf, 22 lbf)3,400 kPa (34 kgf/cm2, 480 psi)
Pressed with 290 N (30 kgf, 66 lbf)9,800 kPa (98 kgf/cm2, 1,400 psi)
Brake boosterMaster cylinder fluid pressure at 0 kPa (0 mmHg, 0 in. Hg) of vacuum with pressing brake pedalPressed with 98 N (10 kgf, 22 lbf)0 kPa (0 kgf/cm2, 0 psi)
Pressed with 290 N (30 kgf, 66 lbf)1,600 kPa (16 kgf/cm2, 230 psi)
Master cylinder fluid pressure at 66.7 kPa (500 mmHg, 19.7 in. Hg) of vacuum with pressing brake pedalPressed with 98 N (10 kgf, 22 lbf)3,700 kPa (37 kgf/cm2, 530 psi)
Pressed with 290 N (30 kgf, 66 lbf)9,800 kPa (98 kgf/cm2, 1,400 psi)


Air Conditioning
ItemMeasurementQualificationStandard or NewService Limit
RefrigerantTypeHFC-134 a (R-134 a)
Capacity of system400-450 g (14.1-15.9 oz)
Refrigerant oilTypeKEIHIN: SP-10 (P/N 38897-P13-A01AH, 38898-P13-003, 38899-P13-A01)
Capacity of componentsCondenser25 mliter (5/6 fl oz, 0.9 lmp oz)
Evaporator35 mliter (1 1/6 fl oz, 1.2 lmp oz)
Each line and hose10 mliter (1/3 fl oz, 0.4 lmp oz)
Compressor85-105 mliter (2 1/6-3 1/2 fl oz, 3.0-3.7 lmp oz)
CompressorStarter coil resistanceAt 68°F (20°C)3.05-3.35 W
Pulley-to-pressure plate clearance0.35-0.65 mm (0.014-0.026 in.)
Alternator- compressor beltDeflection with 98 N (10 kgf, 22 lbf) applied mid-way between pulleysUsed belt7.5-10.5 mm (0.30-0.413 in.)
New belt4.5-6.0 mm (0.18-0.24 in.)
Tension (measured with belt tension gauge)Used belt440-590 N (45-60 kgf, 99-130 lbs)
New belt980-1,130 N (100-115 kgf, 220-254 lbs)

Honda Fit/Jazz 02-05 Workshop Manual    Back to all Manuals