Honda Fit/Jazz - Starter Replacement (Without ETCS)
Starter Replacement
1. | Disconnect the battery negative cable, then disconnect the positive cable.
|
2. | Remove the splash shield.
|
3. | Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the BLK/WHT wire (B) from the S terminal.
|
4. | Remove the two bolts holding the starter, then remove the starter.
|
5. | Install the starter in the reverse order of removal. Make sure the crimped side of the ring terminal (A) is facing out.
|
6. | Connect the battery positive cable and negative cable to the battery.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals