Honda Fit/Jazz - Tailgate Latch Replacement
Tailgate Latch Replacement
NOTE: Put on gloves to protect your hands.
With Security Switch
Remove the tailgate lower trim panel.
2. | Disconnect the tailgate opener cable from the tailgate handle.
|
3. | Disconnect the cylinder rod from the tailgate key cylinder.
|
4. | Disconnect the tailgate latch switch connector (A) and tailgate actuator connectors (B), and detach tailgate latch switch connector from the tailgate.
|
5. | Remove the bolts, and pull the tailgate latch (C) out, then remove it.
|
6. | If necessary, remove the screws, then remove the protector cover (A) from the latch (B), and disconnect the tailgate opener cable (C) from the latch.
|
7. | Install the latch in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly, and the cable is connected properly.
- Make sure the tailgate opens properly and locks securely.
|
Without Security Switch
Remove the tailgate lower trim panel.
2. | Disconnect the tailgate opener cable (A), cylinder rod (B), tailgate actuator connector (C) and tailgate latch switch connector (D), and detach the tailgate latch switch connector from the tailgate.
|
3. | Remove the bolts, then pull the tailgate latch (E) out, then remove it.
|
4. | Install the latch in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly, and the rod and cable are connected properly.
- Make sure the tailgate opens properly and locks securely.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals