Honda Fit/Jazz - Tailpipe Emissions Test (Without ETCS)
Tailpipe Emissions Test
2. | Start the engine. Hold the engine speed at 3,000 rpm (min-1) without load (in Park or neutral) until the radiator fan comes on, then let it idle.
|
4. | Warm up and calibrate the CO meter according to the meter manufacturer¢s instructions.
|
5. | Check idle CO with the headlights, heater blower, rear window defogger, cooling fan, and air conditioner off.
Specified CO %: Except IN model: 0.1 % maximum IN model: 1.0±1.0 %
- If unable to obtain this reading:
IN model, adjust by turning the adjusting screw (A) of the IMA. Except IN model, see DTC troubleshooting.
- If unable to obtain a CO reading of specified % by this procedure, check the tune-up condition.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals