Washer Motor Test
Remove the right inner fender.
2. | Disconnect the 2P connector (A) from the washer motor (B).
|
3. | Test the motor by connecting battery power to the No. 1 terminal and ground the No. 2 terminal of the washer motor. The motor should run.
- If the motor does not run or fails to run smoothly, replace it.
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged pump outlet in the motor.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals