Honda Fit/Jazz - Windshield Wiper Intermittent Control Circuit Input Test
Windshield Wiper Intermittent Control Circuit Input Test
Remove the wiper/washer switch.
LHD type and KE model:
RHD type except KE:
2. | With the connector connected, make these input tests at the connector.
- If a test indicates a problem, find and correct the cause, then recheck the system.
- If the input tests prove OK, replace the wipers/washers switch.
Cavity | Wire | Test condition | Test: Desired result | Possible cause if result is not obtained |
---|
12 9 | BLU/WHT | Ignition switch ON (II), the windshield wiper switch in ‘‘INT'' | Check for voltage between the No. 12 No. 9 and No. 4 No. 3 terminals: There should be about 0-5 V-0-5 V repeatedly. | - Faulty wipers/washers switch
- Faulty windshield wiper motor
- An open in the wire
|
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals